Series RVD
Angle-Pattern Relief Valves
Advantages:
- Protect systems and equipment from dangerous overpressures.
- For use as back pressure valve, straight relief, by-pass relief or back pressure regulator.
- Offer wide range of pressure settings from 5-150 PSI (0.4-10.4 BAR) with sensitive operation.
- Designed with PTFE guides for non-sticking operation.
- Diaphram design eliminates crystallization problems.
- Provide minimum maintenance through simple and efficient design.
Click here for brief video of how a refief valve works.
Flow Rate Reference Chart for Series RVD
Relief Valve Dimensions for Series RVD
At left, Series RVD with PTFE body material.
Plastic pressure relief valves are multi-functional, normally-closed valves for system pressure relief, pump protection, enhancing pump performance, by-pass relief, and balancing pressure in a process system.
For anti-siphon applications, Plast-O-Matic series RVDT features a unique PTFE diaphragm.
Available in Geon PVC, Kynar PVDF, Natural Polypropylene, and PTFE; sizes 1/4" to 3" NPT.
Ideal for corrosive and other chemical process, as well as deionized water, reverse osmosis water...any ultra-pure liquid.
Plast-O-Matic relief valves deliver higher flow at lower overpressures than other typical relief valves. Operation is smooth, sensitive and extremely accurate.
Ordering Information:
Plast-O-Matic Valves, Inc.
1384 Pompton Avenue
Cedar Grove, NJ 07009 USA
Voice: (973) 256-3000
Fax: (973) 256-4745
Top of Page
Kynar® is a registered trademark of Arkema.,
FAIL-DRY® is a registered trademark of Plast-O-Matic Valves, Inc.
Copyright© 2007-2011 Plast-O-Matic Valves, Inc.