In-Line Relief Valves

Advantages:

• Rolling Diaphragm Eliminates Crystallization Problems.
• Fail-Dry Patented Safety Design.
• Sensitive Smooth Operation.
• All Plastic Adjusting Screw.
• Protect systems and equipment from dangerous overpressures.
• For use as back pressure valve, straight relief, by-pass relief or back pressure regulator.
• Offer wide range of pressure settings from 5-120 PSI with sensitive operation.
• 5 to 100 PSI (0.4 to 6.9 bar) Setting Range - 120 PSI (8.3 bar) on 1/2 in. size.

Flow Reference Chart:

Dimensions:

Plastic pressure in-line relief valves are multi-functional, normally-closed valves for system pressure relief, pump protection, enhancing pump performance, by-pass relief, and balancing pressure in a process system.

For anti-siphon applications, Plast-O-Matic series RVDT features a unique PTFE diaphragm.

Available in PVC, CPVC, Kynar PVDF, Natural Polypropylene, PTFE, and glass-filled Polypropylene; sizes 1/4" to 3" NPT.

Ideal for corrosive and other chemical process, as well as deionized water, reverse osmosis water...any ultra-pure liquid.

Plast-O-Matic relief valves deliver higher flow at lower overpressures than other typical relief valves. Operation is smooth, sensitive and extremely accurate.

ORDERING INFORMATION:

Note: For complete information request catalog page RV-3.

RVDM  050                  EP    -    PV

      050 (1/2 in.) 20mm   Seals      Body Material

      075 (3/4 in.) 25mm   EP-EPDM    PV-PVC

      100 (1 in.) 32mm     V-Viton    CP-CPVC(CORZAN)

                                      PP-Polypro (20% Glass Filled)

                                      PF-PVDF

Top of Page

Kynar® is a registered trademark of Arkema.,
Corzan™ is a trademark of Noveon

FAIL-DRY® is a registered trademark of Plast-O-Matic Valves, Inc.

Copyright © 1997-2005 Plast-O-Matic Valves, Inc.