POM Logo

Series WCM

Tough, Rugged 1/2" Engineered Thermoplastic Solenoid Valve
for Water and Mild Solutions
2,000,000+ Cycle Life!

wetted core solenoid valve offers the ultimate design quality in its price range

125 PSI inlet & backpressure rating with 0.4 Cv
Continuous duty, NEMA 4X CSA approved coil
Rugged black polypropylene design, normally-closed

Designed for applications requiring a compact, very cost effective and high pressure rated valve with extended cycle life. This valve is ideal if your process uses less aggressive liquids that are compatible with a wetted metal core. Among lower cost solenoid valves, Series WCM represents the best combination of price and performance available.

Features:

Compact Size: At just over 4 in. high, these valves are ideal for limited space installations. Weighs just 13 oz. total.
Economical: Low unit cost coupled with high pressure ratings and considerable flow rate (Cv of 0.4) offer excellent opportunities for systems requiring quick opening/quick closing solenoid valves.
High Pressure: Particularly for applications where high back-pressures (up to 125 PSI) are required e.g. controlling flow to spray nozzles, high pressure water injections, etc. Inlet pressure to 125 PSI. Series WCM will open or close under any combination of pressures, as long as backpressure does not significantly exceed inlet pressure.
(Please contact our Technical Group at 973-256-3000 if you have questions about your specific application).

Unique Design: Glass-filled polypropylene cover isolates coil and protects valve body from excessive heat, permitting up to 60 cycles per minute.
Versatility: The wetted metal core is well suited to city water, many wastewater applications, pure water, and mild chemicals.
Superior Performance: 2,000,000 cycle design.
Energy Efficient: Molded 11 Watt NEMA 4X style coil with DIN standard connector results in low energy consumption...CSA approved.
Size: 1/2 in. pipe size with .14" (3.05 mm) Orifice.
Corrosion Resistant: Rugged thermoplastic construction is resistant to harsh environments.
For catalog page in .pdf format:
Series WCM - 1/2" Normally-Closed Wetted Core Solenoid Valve for water and mild solutions

Design and Operation:

Note in the dimensional drawing above that process liquid is in contact with metal parts in Series WCM. All other Plast-O-Matic Solenoid Valves have a "shielded core," in which no metals are in contact with process liquid. Suitability of Series WCM for a particular application is determined by corrosion/purity parameters of the process liquid. In many cases a physical test of the valve under operating conditions is the only way to ensure the success of a particular valve for a specific application. The ultimate determination of suitability of any product or material is the sole responsibility of the user.

Series WC Specifications and Model Numbers
Pipe Size	Orifice Size in. mm	Watts	CV	Max. Pressure Inlet PSI Bars	Max. Pressure Outlet PSI Bars	EPDM Seals Model No.
½"	.14 3.05	11	0.4	125 8.3	125 8.3	WCM4EP6W11-PP
No minimum operating differential pressure required to open or close; valve will begin to open if outlet pressure significantly exceeds inlet pressure.

Notes:

The Model Number listed shows EPDM seals. For Viton seals (optional) change 'EP' to 'V'; WCM4V6W11-PP. Price is the same.

Model Numbers shown with 'W11' (water and dust tight NEMA 4 style coil).

Valves are rated for full vacuum of 30 in. of mercury (Hg).

Black polypro is standard body material.

Complete Specifications:

Valve Specifications

Piping Connections: 1/2"" female NPT
Orifice Size: .14" (3.05 mm)
Cv Rating: 0.4
Inlet Pressure Rating: Full vacuum to 125 psi maximum
Backpressure Rating: Full vacuum to 125 psi maximum
Backpressure Limitation: If backpressure exceeds inlet pressure, valve will begin to open.
Operation: Normally-closed. Direct acting; needs no minimum differential pressure to open or close. Bubble-tight shutoff.
Tested Cycle Life: 2,000,000+ (TESTED 2,000,000+ TIMES UNDER LAB CONDITIONS), Recommend periodic inspection of disk.
Weight: 13 oz. with coil and connector
Body Material: Glass-filled black polypropylene
Elastomers: EPDM or Viton; no dynamic seals
Wetted Core Materials: 300 Series & 430F stainless steel, and a small amount of silver.

Coil Specifications

Electrical: 120V AC +/-10%; 11 watts
Ratings: NEMA 4X (IP65)
Connector: DIN 43650 supplied
Coil and DIN Connector are CSA approved

Options

Coil Connector Light: Can be ordered with this feature, which lights up brightly to show when the solenoid is energized.
Alternate Materials: May be available, depending on quantities and temperature compatibility. Please contact our Technical Group at (973) 256-3000 or e-mail us to discuss your application.

Helpful Links & Additional Solenoid Valves:

Determining Amperage for a Plast-O-Matic Solenoid Valve This is a technical document in Microsoft Word format that explains how to calculate the amperage required for Plast-O-Matic AC or DC coils.

Non Wetted Core Design: If your process media is not compatible with Series WC's wetted metal core design, yet lower cost is a primary concern, please refer to Series EAST.

Fail-Dry Design: If you would like the added protection of the patented Fail-Dry vent, Plast-O-Matic provides a number of solenoid valve options; including Series EAST, EASM/D, EASMT and PS. See specific links immediately below.

Full-Featured Solenoid Valves:

Series EAST, mentioned above, is a full-featured valve closest in price to Series WC, with AC or DC coils in a variety of voltages. Features a PTFE bellows seal and a choice of two orifice sizes.
Series EASMT & EASYMT is a line of premium quality solenoid valves. Features a PTFE bellows seal and a variety of pipe sizes, materials and orifice sizes, and can be ordered with a number of different coils from general purpose through explosion-proof.
Series EASM/EASYM/EASMD/EASYMD is a line of heavy duty solenoid valves. Features a Diaphragm or U-Cup seal and a variety of pipe sizes, materials and orifice sizes, and can be ordered with a number of different coils from general purpose through explosion proof.
Series PS is a line of pilot-operated solenoid valves. Features a PTFE Bellows seal and pipe sizes to 3", in a variety of materials and coil choices. Pilot-assisted operation is suitable for high pressure and flow applications. Requires 5 psi pressure drop for operation.